Any autoclave or sterilizer becomes smart thanks to a Wi-Fi or Ethernet enclosure and the IA AutoclaveConnectPro Cloud — without replacing your existing fleet.
Most autoclaves are reliable but silent. Manual tracking multiplies blind angles.
The thermal paper pales, the USB drives get lost — difficult to reconstruct during a sanitary check.
A drop in pressure or insufficient temperature goes unnoticed until the end of the cycle.
Physically monitoring the machine mobilizes valuable time at the expense of care.
A three-stage architecture, deliberately agnostic to the hardware.
Wi-Fi or Ethernet sensor (Default Inkbird) coupled to your autoclave.
Secure transmission of data to the cloud, wireless or wired.
AutoclaveConnectPro analyzes each cycle and returns everything to a dashboard.
This distinguishes the platform from a simple connected thermometer: intelligent analysis.
Each phase — ascent, tray, drying — is interpreted to identify unusual curves.
AI reports deviations from your machine's usual behavior.
Each time cycle, archived, searchable and exportable in PDF.
Supervise your entire park from a single dashboard, wherever it is.
End of cycle notification and immediate alert in case of an anomaly, by email and in the app.
No installation: access from any browser, computer, tablet or smartphone.
No closed ecosystem: the platform dialogues with the vast majority of equipment on the market.
Hollow and porous instruments (turbines, endoscopes). Careful monitoring of pressure and temperature curves, cycle by cycle.
Full or unpackaged instruments. Same monitoring rigor, standardized data across the park.
Adaptation to longer thermal dynamics, continuous monitoring over several hours.
Inkbird recommended by default — but you choose according to your environment, network and budget.
For autoclaves with internal serial output but without Wi-Fi.
Only with a suitable high temperature probe (standard DS18B20 probes do not hold 121–134 °C under pressure).
| Manufacturer/Model | Network | Sound | Protocols | Target use |
|---|---|---|---|---|
| InfraSensing SensorGateway | RJ45 (PoE option) | Temp., humidity, thermocouples | Modbus TCP, SNMP, JSON/HTTPS | Labs, cloud IoT, clean rooms |
| HW group STE2 / Poseidon2 | RJ45 | 1-Wire, dry contacts | MQTT, HTTPS, SNMP | Servers, environmental monitoring |
| Sollae GIS-5560 | RJ45 | PT100 (-200 to +850 °C) | Modbus TCP | Autoclaves, high precision |
| Phase IV Leap Gateway | RJ45 | Multi-sensor | API, web-services | Heavy industry, thermal |
Timed and automatically archived cycles: a bundle of documentary evidence useful during your internal controls and audits. Complete, without replacing, the regulatory validation devices specific to each autoclave.
Automated monitoring and logging frees up reinvested operational time in care.
Continuous recording helps identify signs of wear before breakdown, limiting costly stops.
Light traffic, secure transmission, deployment without redesign of existing.
Do not let your cycle data evaporate. Enter the era of intelligent sterilization, connected and analyzed by AI.
Start for 29 €/month TTC